Tick-Tock and HA5 | HIR News

Watch this TIP with Andale Construction on HA5…and join IPMA™ Academy for free.
Screen Shot 2015-09-25 at 7.49.10 PM
One week left to get Module 1 (full seven weeks) for FREE!

This series will be a “funducational” experience for all. You will receive the most comprehensive video training program available today and perhaps at any time. During IPMA™ Academy training you will receive online curriculum taught by world-class pavement management experts.

IPMA™ Academy will teach agency engineers how to do more with less, while increasing their authority, expertise, and income.

All videos will be high-definition with precise detail on how to implement the three-legged stool system, which marries in-place asphalt recycling, pavement preservation, and a proactive pavement management program.

Consultants and contractors are also encouraged to join our training, along with any other suppliers or vendors who feel it would be beneficial to furthering their career. Each week new material will be released.
If you aspire to further your education in these core competencies listed above, and you have a burning desire to become a pavement management RockSTAR, then this Accredited Pavement Manager certification program is for YOU.

And we are offering for the 1st TIME EVER: Get Started for FREE!
screen-shot-2016-09-29-at-11-07-52-am

screen-shot-2016-09-29-at-11-07-58-am

Need PDH Hours and Want to Save Millions in Pavement Management?

 

Screen Shot 2015-03-02 at 11.00.02 AM

☀️Grab your seat now☀️

How Cities and Counties Will Save 2.5 Billion Dollars in 2016 With The Three Legged Stool™ of Pavement Management

With Your Host Blair Barnhardt, APM Author of the Amazon #1 Best Seller The Book on Better Roads

REGISTER HERE FOR WEBINAR TOMORROW

 
AND

Click below for registration for PDH Certficate for 2 Hours of Pavement Management Training!
Screen Shot 2016-06-14 at 2.37.44 PM
Thank You and Enjoy the Webinar!

Thanks;.)

Lori (For Blair)

Basic Asphalt Recycling Manual | B.A.R.M

What you will learn:

Screen Shot 2016-06-09 at 4.37.41 PMThe growing demand on our nation’s roadways over that past couple of decades, decreasing budgetary funds, and the need to provide a safe, efficient, and cost effective roadway system has led to a dramatic increase in the need to rehabilitate our existing pavements. The last 40 years has also seen a dramatic growth in asphalt recycling and reclaiming as a technically and environmentally preferred way of rehabilitating the existing pavements. Asphalt recycling and reclaiming meets all of our societal goals of providing safe, efficient roadways, while at the same time drastically reducing both the environmental impact and energy (oil) consumption compared to conventional pavement reconstruction.

The Board of Directors of the Asphalt Recycling and Reclaiming Association (ARRA), in their ongoing commitment of enhancing and expanding the use of asphalt recycling and reclaiming, recognized a need for a “Basic Asphalt Recycling Manual”. The manual was needed in order to expose more owners, specifying agencies, consultants, and civil engineering students to the value and current methods of asphalt recycling. To fill that need, this manual was produced to serve as a handy one-stop reference to those starting out in one of the various forms of asphalt recycling. In addition, it is hoped that this manual will provide additional useful information to those already in- volved in asphalt recycling.

This manual is not written in such detail so that one could use it to completely evaluate, design, specify, and/or construct an asphalt recycling project. It does however, provide information on:

• Various asphalt recycling methods
• Benefits and performance of asphalt recycling
• Procedures for evaluation potential projects
• Current mix design philosophies
• Construction equipment requirements and methods
• Quality Control/Quality Assurance, inspection and acceptance techniques

• Specification  requirements
• Definitions and terminology

Sufficient information is provided so that a rational decision can be made with respect to the feasibility and/or cost benefits of asphalt recycling. From that point, detailed design issues will need to be addressed by those experienced in asphalt recycling techniques prior to the final project design, advertising, tendering or letting and construction.

The benefits of asphalt recycling include:

• Reuse and conservation of non-renewable natural resources

• Preservation of the environment and reduction in land filling

• Energy conservation
• Reduction in user delays during construction

• Shorter construction periods

• Increased level of traffic safety within construction work zone

• Preservation of existing roadway geometry and clearances

• Corrections to pavement profile and cross-slope

• No disturbance of the subgrade soils unless specifically planned

• Such as for Full Depth Reclamation (FDR)

• Improved pavement smoothness Improved pavement physical properties by mod- ification of existing aggregate gradation, and asphalt binder properties

• Mitigation or elimination of reflective cracking with some methods

• Improved roadway performance
• Cost savings over traditional rehabilitation methods

It is important to recognize that asphalt recycling is a powerful method to rehabilitate pavements. When properly applied, it has long term economic benefits allowing owner agencies to stretch their available funds while providing the traveling public with a safe and reliable driving surface.

It is also important to recognize that, although asphalt recycling technology and methods has advanced, not all roadways are appropriate candidates for asphalt recycling. With the almost endless supply of roadways needing rehabilitation, it would be a dis- service to the public and the industry to use poor judgement in attempting an inappropriate recycling project. Hopefully, with this manual and the advice of those experienced in asphalt recycling, only projects that are suitable candidates will be undertaken.

The primary focus of the manual is on the in-place and cold recycling of asphalt pavements. Hot recycling of asphalt pavements through various types of asphalt plants is a well established recycling method. There is a wide variety of information on the subject available from well established sources and therefore has not been covered in any detail in this manual.

You can order your here:

http://arra-online.myshopify.com/products/basic-asphalt-recycling-manual-2014

And do not forget the FREE BOOK HERE:

320x50a

I-88 Rubberized Asphalt Project

Last year, Asphalt Plus conducted a trial project of dry process crumb rubber modified asphalt on Interstate 88 near Rochelle, Illinois. The project included the laboratory evaluation of two asphalt mix design and placement of two lane-miles of pavement on I-88.

The first mix was:

  • Friction SMA (ILDOT)
  • 34% ABR (5% RAS and 8 lbs of rubber mix per ton)
  • No RAS content

Tests suggest comparable Hamburg and DCT performance between dry process CRM asphalt and PMA.Screen Shot 2016-05-19 at 5.49.06 PM

  • 2 vs. 2.5 mm rut respectively
  • 602 vs. 566 DCT respectively

The second mix was:

  • 12.5 N75 Fine Surface Graded Mix (WIDOT)

Lab testing of the WIDOT mix with and without engineered dry process rubber showed the rubber additions significantly improved mix performance.

Presence of rubber improved:

  • Hamburg rutting from 8.2 mm at 10,000 passes to 3.4 mm at 20,000 passes
  • Increased DCT results from 358 to 482

Modifying The PlantScreen Shot 2016-05-19 at 5.49.15 PM

The Curran DeKalb plant was modified for dry process asphalt production in a matter of a few hours.

Using a loss-in-weight feeder system:

  • Engineered crumb rubber was injected into production with a high degree of accuracy
  • Plant production of CRM asphalt at full production rates occurred without interruption
  • Two mix designs were produced in sequence with minimal waste

The asphalt mixes were trucked 40 miles on a cool day (55 F at start), and placement temperatures ranged from 235 to 280 F off the trucks.

The Finished Product:

  • Finished without any tearing
  • Vibratory rollers produced specified compaction without special effort and without stopping plant operations

Performance evaluations will continue in the field following a winter of service. The existing record of technology field performance in colder climates strongly suggests that the use of dry process engineered rubberized asphalt mix designs will be permitted as a competitive alternative to other forms of modified asphalt. The cost advantage suggests this process will benefit both producers and road owners.

 

View full case study

From http://asphaltplus.com/rubberized-asphalt-trial-project/

And get the FREE BOOK!

320x50a

IPMA Academy | Accredited Pavement Managers | Testimonials Part 1

320x50a

Adelina Lowry, MD, APM

Q.  Name one thing you learned in the course that surprised you.

A.  I learned the criteria to quantify the range of impact of a pavement treatment on the PCI, based on the life span of the treatment
Q.  What two pieces of knowledge/tactics from the APM certification course are you most likely to use in your job?    

A.  More than two items:

•    Propose the paving coring at the project level to validate the road treatment recommended by the decision tree (PCI vs Treatment)

•    Propose a new pavement investment strategy:
* 20 % budget – pavement preservation
* 60 % budget – pavement rehabilitation
* 20 % budget – pavement reclamation/recycling
•    Evaluate the performance over time of the existing pilot samples of HA5 applied to sections of subdivision roads of different ages

Wayne McField, APM

Q.  Name one thing you learned in the course that surprised you.    

A.  MORE about FDR and pavement treatments and timing.

Q.  What two pieces of knowledge/tactics from the APM certification course are you most likely to use in your job?  

A.  All of it. It is very informative.

Jeremy Lucero, PE, APM

Q.  Name one thing you learned in the course that surprised you.  

A.  I was surprised to learn that lime could be used to mitigate the swell potential of clays.
Q.  What two pieces of knowledge/tactics from the APM certification course are you most likely to use in your job?    

A.  Lime as a swell mitigation technique and possibly cement in CIP.

Luis Padilla, APM

Q.  Name one thing you learned in the course that surprised you.    

A.  The fact that there are still so many out there that wont take action to make necessary improvements to their roadways.
Q.  What two pieces of knowledge/tactics from the APM certification course are you most likely to use in your job? 

A.  Application process/material usage and when

Brian Boder PE, APM

Q.  Name one thing you learned in the course that surprised you.    

A.  There are more tools in the proverbial tool bag than I expected.
Q.  What two pieces of knowledge/tactics from the APM certification course are you most likely to use in your job?  

A.  Managing pavements works and continue experimenting with different techniques and materials

Learn How to Use the Three Legged Stool™ System of
Pavement Management to Save Your Crumbling Roads…

http://www.ipmaacademy.com/

 

Flat Rate for Pavement Management: $278.77 per CLM for Counties and $324.77 per CLM for Cities

Hey !

Would you spend 3 cents per SY to save millions?

The Barnhardt Group will show you

EXACTLY how to do JUST THAT!

Flat Rate of:
 
$278.77 per CLM for Counties and
 
$324.77 per CLM for Cities

CLICK to See ENTIRE Scope of work HERE.

Wellington Kansas PM

Wellington Kansas PM

A recent press release shows one Agency paying up to $800 bucks per mile!  GEEZ!
 
CLICK HERE TO READ

Blair

P.S.  The first 3 Agencies in TX to sign up before January 1, 2016 will receive the first year of StreetSaver absolutely FREE!

P.S.S.  Those three Agencies will not even pay for migration from their current PM database!  UNBELIEVABLE!

P.S.S.S.  Small surcharge for PCC roads and random surveys less than entire network.  Nationwide, we will be charging one way mobilization.

P.S.S.S.S.  We give away two FREE scholarships to IPMA Academy & one 8 DVD box set.

The Heart-Wrenching Facts | SafetyCurve.com | There is A Solution

CLICK THE MANGLED TRUCK!

Help Save Your
City or County (or even family members)
from Fatal Crashes .

Deadly Roads NEED Safety Curve™

Deadly Roads NEED
Safety Curve™

SafetyCurve.com™

Here are the FACTS!

A recent study found the $217 billion dollar cost of deficient roadway conditions dwarfs the costs of other safety factors, including:  
$130 billion for_alcohol,
$97 billion for speeding,
or $60 billion for not wearing a safety belt.
 
The report concluded that roadway related crashes impose:
$20 billion in medical costs;
$46 billion in productivity costs;
$52 billion in property damage and other resource costs; and  $99 billion in quality of life costs.
 
This “tale of the tape” measures the value of pain, suffering, and loss of enjoyment of life by those injured or killed in crashes and their families.
 
Crashes linked to road conditions cost taxpayers over $12 billion every year.

Will you do more to save lives?

For SafetyCurve™, we will be accepting applications for treatment sections Nationwide on a FIRST come FIRST SERVE basis.
 
If YOU are interested and want to go to front of line call Lori at 404-953-013 or email: lori@safetycurve.com.

www.safetycurve.com

Reno County Commission Introduced to Pavement Management by The Barnhardt Group

Written By: John Green

The Hutchinson News

jgreen@hutchnews.com

A Georgia-based pavement management contractor currently doing assessment work in Wellington made a presentation to the Reno County Commission Tuesday on the benefits of having a pavement management system.

Reno County Public Works Director Dave McComb, who is interested in developing such a system for the county, invited Blair Barnhardt of The Barnhardt Group to the meeting.

There is no money in the current county budget to implement such a system, but McComb said he would like the commission to be prepared to make a decision on whether enter such a contract in advance of the 2017 budget.

The purpose and benefit of a pavement management system, Barnhardt explained, is identifying preservation work that can extend a road’s life, rather than rebuilding roads after they have deteriorated, which is a more cost effective use of public works dollars.

Barnhardt’s company takes core samples from identified roadways to determine their makeup, assesses existing conditions of the road surface and subsurface, and then identifies up to 20 “distressers” that are impacting the life and condition of the road.

He gets down on his hands and knees, for example, Barnhardt said, to measure the length, depth, and severity of cracks in the pavement.

From the data gathered on the roads, a software program then makes recommendations on which of various methods of preservation work would best extend the life of the road at the most economical cost.

Spending 2 to 3 cents per square yard on assessment, Barnhardt contended, can save $10 a square yard on maintenance. Once the management system is in place, he said, “using the right treatments in the right place at the right time” can stretch road dollars by at least twice as much. Moreover, the industry is developing new preservation methods all the time.

So, rather than spending $1 million per mile to replace a deteriorated road, the county might be able to spend the same amount on preserving 20-plus miles of road and, eventually, with saved dollars, replace that deteriorated road.

David Edwards, of GSI Engineering in Wichita, which has partnered with Barnhardt in assessing projects identified by the management system, joined Barnhardt at the meeting.

Edwards noted that using the system might require the commission to allow already deteriorating roadways, which are already resulting in complaint calls to the commission, to deteriorate further while they do work on roads that appear in good condition, which may be politically difficult.

“You save what you can save first, and do the really bad roads down the road,” he said.

The commission will be able to point to hard evidence from the system that the decisions are more economically efficient, he said.

McComb, already interested in pavement management, learned more at a recent “lunch and learn” event sponsored by The Barnhardt Group.

The county has a system in place to sand seal so many miles of road each year, and pave so many miles of arterial with a cold asphalt mix, McComb said. However, he was interested in seeing what could be done, for example, to preserve the work done on Yoder Road 10 years ago, rather than spending millions to mill and asphalt the road again in 5 years.

“How can we get the best bang for our buck?” he said.

McComb also expressed a desire to have a system in place for determining road project spending that will still be in place when he is gone.

Asked by Commissioner Brad Dillon how their fee would work, Barnhardt said it is based on a per-mile contract, but it could be spread over several years, done all at once for a discount, or on a not-to-exceed pro-rated basis.

Learn more about Blair Barnhardt and The Barnhardt Group at wwwdrivingamericaforbetterroads.  Or get the #1 Best Seller, “The Book on Better Roads” for FREE at http://www.thebookonbetterroads.com

Call The Barnhardt Group to schedule your free consult with Blair that could SAVE YOUR AGENCY MILLIONS!  404-361-9792 or email lori@thebarnhardtgroup.com .

More Roads, Less Money, Less Carbon Footprint: Graniterock IPMA™ Charter Members Spotlight

From Graniterock Tools Newsletter:

Hot-in-place tests high, saves cash | IPMA™ Charter Member

We are SO proud of our IPMA™ Charter Members, Dustrol, Inc.

Way to go Brian!  I found this is “The Kansan”…

Screen Shot 2015-09-25 at 7.49.10 PM

By Nicolas Wahl
Newton Kansan

Posted Sep. 25, 2015 at 12:01 AM

An alternative roadway reparation technique utilized by the Harvey County Road and Bridge Department to save on costs has earned star marks after a recent round of testing.Over the past year the county has contracted out 19.3 miles of paved road to Dustrol Inc., Towanda, to be resurfaced using Dustrol’s hot-in-place recycling technique rather than a traditional surface overlay.

“What they decided to implement this year that they didn’t last year was a profilograph,” said Jim Meier, road and bridge superintendent for the county. “What the machine does is reads the defects in a road.”

The definition of a defect is any imperfection measuring 4/10 of an inch bump over 528 feet of roadway.The company administered the test on five miles of a recently completed stretch of East First Street starting at Rock Road and extending to the western border of Butler County.

“They read the results before and after (the work).” Meier said. “The before was a total of 361 defects on East First. When they took the profilograph back over that when they were done they had zero.”

Meier said the process cost the county just more than $1.5 million. He said that number is about 65-percent of the cost of a traditional two-inch overlay over the same mileage.

“Along with what else a two-inch overlay does is it raises the road,” Meier said. “Over time you actually narrow the road. The hot-in-place takes the existing two inches of pavement, in this case, picks it up and rejuvenates the aggregate.”

The fresh asphalt is then put back where it originally came from in a single operation requiring about 1,000 feet of equipment.

“We do still have roads that this is not a viable solution for,” Meier said. “Those roads will still get an overlay.”

Meier said while not a catchall solution for the resurfacing of county roads, he hopes to use the hot-in-place process as an ongoing solution for a significant portion of county mileage.