Basic Asphalt Recycling Manual | B.A.R.M

What you will learn:

Screen Shot 2016-06-09 at 4.37.41 PMThe growing demand on our nation’s roadways over that past couple of decades, decreasing budgetary funds, and the need to provide a safe, efficient, and cost effective roadway system has led to a dramatic increase in the need to rehabilitate our existing pavements. The last 40 years has also seen a dramatic growth in asphalt recycling and reclaiming as a technically and environmentally preferred way of rehabilitating the existing pavements. Asphalt recycling and reclaiming meets all of our societal goals of providing safe, efficient roadways, while at the same time drastically reducing both the environmental impact and energy (oil) consumption compared to conventional pavement reconstruction.

The Board of Directors of the Asphalt Recycling and Reclaiming Association (ARRA), in their ongoing commitment of enhancing and expanding the use of asphalt recycling and reclaiming, recognized a need for a “Basic Asphalt Recycling Manual”. The manual was needed in order to expose more owners, specifying agencies, consultants, and civil engineering students to the value and current methods of asphalt recycling. To fill that need, this manual was produced to serve as a handy one-stop reference to those starting out in one of the various forms of asphalt recycling. In addition, it is hoped that this manual will provide additional useful information to those already in- volved in asphalt recycling.

This manual is not written in such detail so that one could use it to completely evaluate, design, specify, and/or construct an asphalt recycling project. It does however, provide information on:

• Various asphalt recycling methods
• Benefits and performance of asphalt recycling
• Procedures for evaluation potential projects
• Current mix design philosophies
• Construction equipment requirements and methods
• Quality Control/Quality Assurance, inspection and acceptance techniques

• Specification  requirements
• Definitions and terminology

Sufficient information is provided so that a rational decision can be made with respect to the feasibility and/or cost benefits of asphalt recycling. From that point, detailed design issues will need to be addressed by those experienced in asphalt recycling techniques prior to the final project design, advertising, tendering or letting and construction.

The benefits of asphalt recycling include:

• Reuse and conservation of non-renewable natural resources

• Preservation of the environment and reduction in land filling

• Energy conservation
• Reduction in user delays during construction

• Shorter construction periods

• Increased level of traffic safety within construction work zone

• Preservation of existing roadway geometry and clearances

• Corrections to pavement profile and cross-slope

• No disturbance of the subgrade soils unless specifically planned

• Such as for Full Depth Reclamation (FDR)

• Improved pavement smoothness Improved pavement physical properties by mod- ification of existing aggregate gradation, and asphalt binder properties

• Mitigation or elimination of reflective cracking with some methods

• Improved roadway performance
• Cost savings over traditional rehabilitation methods

It is important to recognize that asphalt recycling is a powerful method to rehabilitate pavements. When properly applied, it has long term economic benefits allowing owner agencies to stretch their available funds while providing the traveling public with a safe and reliable driving surface.

It is also important to recognize that, although asphalt recycling technology and methods has advanced, not all roadways are appropriate candidates for asphalt recycling. With the almost endless supply of roadways needing rehabilitation, it would be a dis- service to the public and the industry to use poor judgement in attempting an inappropriate recycling project. Hopefully, with this manual and the advice of those experienced in asphalt recycling, only projects that are suitable candidates will be undertaken.

The primary focus of the manual is on the in-place and cold recycling of asphalt pavements. Hot recycling of asphalt pavements through various types of asphalt plants is a well established recycling method. There is a wide variety of information on the subject available from well established sources and therefore has not been covered in any detail in this manual.

You can order your here:

http://arra-online.myshopify.com/products/basic-asphalt-recycling-manual-2014

And do not forget the FREE BOOK HERE:

320x50a

Advertisements

I-88 Rubberized Asphalt Project

Last year, Asphalt Plus conducted a trial project of dry process crumb rubber modified asphalt on Interstate 88 near Rochelle, Illinois. The project included the laboratory evaluation of two asphalt mix design and placement of two lane-miles of pavement on I-88.

The first mix was:

  • Friction SMA (ILDOT)
  • 34% ABR (5% RAS and 8 lbs of rubber mix per ton)
  • No RAS content

Tests suggest comparable Hamburg and DCT performance between dry process CRM asphalt and PMA.Screen Shot 2016-05-19 at 5.49.06 PM

  • 2 vs. 2.5 mm rut respectively
  • 602 vs. 566 DCT respectively

The second mix was:

  • 12.5 N75 Fine Surface Graded Mix (WIDOT)

Lab testing of the WIDOT mix with and without engineered dry process rubber showed the rubber additions significantly improved mix performance.

Presence of rubber improved:

  • Hamburg rutting from 8.2 mm at 10,000 passes to 3.4 mm at 20,000 passes
  • Increased DCT results from 358 to 482

Modifying The PlantScreen Shot 2016-05-19 at 5.49.15 PM

The Curran DeKalb plant was modified for dry process asphalt production in a matter of a few hours.

Using a loss-in-weight feeder system:

  • Engineered crumb rubber was injected into production with a high degree of accuracy
  • Plant production of CRM asphalt at full production rates occurred without interruption
  • Two mix designs were produced in sequence with minimal waste

The asphalt mixes were trucked 40 miles on a cool day (55 F at start), and placement temperatures ranged from 235 to 280 F off the trucks.

The Finished Product:

  • Finished without any tearing
  • Vibratory rollers produced specified compaction without special effort and without stopping plant operations

Performance evaluations will continue in the field following a winter of service. The existing record of technology field performance in colder climates strongly suggests that the use of dry process engineered rubberized asphalt mix designs will be permitted as a competitive alternative to other forms of modified asphalt. The cost advantage suggests this process will benefit both producers and road owners.

 

View full case study

From http://asphaltplus.com/rubberized-asphalt-trial-project/

And get the FREE BOOK!

320x50a

Pavement Management Kick Start Check List

 

ipma-logo-powerhour

Many of you know our mission, but some are just coming in to our fold having registered for a webinar or one of our training sessions. For those of you who are new and want to catch up, please head over to http://blairbarnhardt.com/ and click your way around.

 

Worth a quick listen to is our plan to save America billions of dollars each year http://ireport.cnn.com/docs/DOC-1243694 and have a listen to this podcast session where Scott McDonald, APM and I discuss setting up your pavement management system http://ipma.co/betterroadsradio/2014/01/16/episode-3-the-one-where-blair-corners-scott-mcdonald-ipma-advisory-board-member-and-paver-guru/ . If you are wondering how excited our TBG clients get after we finish serving them up a fresh new pavement management implementation watch Mayor Shelley here https://ipma-1.wistia.com/medias/q9qtijhjaz . Here is a video that was created by the local news team to explain what our crews were doing out there on the roads https://ipma-1.wistia.com/medias/32gs5ghka7 .

 

Our 2016 PDH Power Hour Webinar Series will walk you through everything you need to purchase, or hire out to begin saving your Agency millions of dollars each year. In fact our learners and clients routinely perform pavement management with The Three Legged Stool™ System of pavement management, and go on to save about million dollars annually for every 250 center lane miles of roadway they have. For example, in Rockdale County GA, Miguel Valentin, PE, APM and Brian Frix, PE, APM are saving about 2 million dollars per year with their 510 center lane miles of roadway after their StreetSaver® implementation with us.

 

Every time we kick start a new implementation of pavement management with a City or a County anywhere in America it seems one of our team members is sitting down with the local agency and asking the same group of questions. For this reason, in our most recent meeting I promised myself I would simplify the questions by making this check list. Feel free to share it amongst your staff and peers!

 

  • Does your local agency have a GIS (Geographical Information System) Guru on staff?

 

If YES, we usually always recommend that your agency pay the $1,750.00 one time integration fee to MTC StreetSaver.

 

 

As Brian Frix, PE, APM (Rockdale County GA and IPMA™ Advisory Board Member states, “To gain maximum potential out of StreetSaver® it’s best to utilize the agencies centerline shape file. It’s a small initial investment that provides a more complete and accurate database upon completion.

 

Always maintain an accurate PCI map. This helps non-technical and elected officials the ability to see the “big picture” without going thru a comprehensive technical report.

 

  • Does your staff have a list of unit prices for typical treatments you have used in the past, i.e. Hot Mixed Asphalt, High Density Mineral Bond, Cold in Place Recycling etc. It is imperative that the pavement management consultant get local regional unit prices as well as first hand knowledge on what treatments are not regionally available.

 

As Mr. Frix, PE, APM states, “Utilize local unit pricing for decision tree setup. And locals decision/ability to utilize certain treatments.” Now is the time to get off the proverbial pot and do some of the more innovative treatments you have been dreaming about doing!

 

  • Have you in the past rated your roads in any way shape of form?

 

Now is the time to come clean with your consultant, if you have done a windshield survey a while back, and or an Excel spreadsheet, now go ahead and give your consultant every stich of paper you may have, in the form of scribbled notes or maps. This information will help provide a solid scientific evidence to ensure a robust pavement management implementation.

 

  • Would you prefer MicroPAVER™ or StreetSaver® implementation?

 

Now is the time to commit to one program or the other. Even though there are other rating systems and tablet programs proliferating the marketplace, I think the only two programs that a PS related are as follows

 

MicroPaver™

StreetSaver®

 

You can demo a free version of StreetSaver® for 30 days here http://www.streetsaveronline.com/ worth noting is that MTC or Metropolitan Transportation Commission who provides the StreetSaver® Software is actually a governmental agency much like you! In fact they have over 400 users worldwide including some of the largest Cities and Counties in America such as Seattle, WA and Houston, TX.

 

 

  • Do you have a paper map for us and a list of roadways?

 

Blair is old school and loves his paper maps, while Jason and some of the other team members love their PDF maps on their iPads in the field! In any case, if you could provide a 36” map that clearly shows all of the roads we can sit down with you and determine the roadway network as a whole. For example, we can determine if you don’t already know what roads will be entered as Arterial, Minor Arterial, Collector and Local. We can decide which roads you may share with the County if you are a City and visa versa. Also, we will discuss our standard operating procedures for accurate measurement.

 

It pains me as a former vice president of a paving firm to see other pavement managers paying little if any attention to detailed quantities and accurate square yard measurements. What good is your budget if no one takes the time to add up all the cul de sacs, turnouts, widenings, round a bout s etc.? In fact, when we have something a little difficult to measure in the field with our digital devices we turn to http://goipave.com/ to do digital take offs.

 

  • Can we get a list of street names as they are entered into your GIS software?

 

In order to ensure that the StreetSaver® auto linkage works at its maximum efficiency and in order to minimize the time that Brian Frix, PE, APM will take performing manual GIS linkage, it is best for Lea and our data entry team to replicate the nomenclature for street name inventory on the GIS files. If you are using the US Tiger GIS Files, the process will take more manual linkage.

 

  • Do you have an idea of what your annual budget for roadway maintenance and rehabilitation will be?

 

As Jonathon Heese, APM Master states. “Just do it!! Figure out how much money you have to spend per year. We ran multiple scenarios at Arapahoe County, Colorado with Blair and fine-tuned our budgets. We also ran several what if unconstrained scenarios and target scenarios.”

 

“Nothing more affordable than StreetSaver® (or MicroPaver). Maybe you have been doing pavement management for years but your efforts have floundered. StreetSaver® and boots on the ground survey can reinvigorate you pavement management and give you the confidence to begin again. This time though, right sized and much more sustainable than before. Even very small towns are using StreetSaver® effectively. It has been said the right exercise for you is the one that you will do. The same could be said for pavement management. This is the easiest way and most cost effective method to save your agency money!”

 

 

Here is a short video of Jon discussing his set up in Arapahoe County, Colorado (the oldest County in Colorado) https://ipma-1.wistia.com/medias/yv7a57o3i2

 

Here is a sample final report that we did for City of Winder, GA https://ipma-1.wistia.com/medias/9gus5nnh31

 

  • Do you have some of your own equipment for preservation and rehab?

 

Many of our clients perform some of their work in house. Whether paving or crack sealing and filling or otherwise, we need to know so we can customize your work plan and requisite Decision Tree to maximize your return on investment as well as recommend other types of equipment you may benefit from owning. We will also determine when it is time to hire out to contractors rather than use your in house equipment.

 

  • Do you have accurate unit prices for all of your previous work?

 

In order for us to customize your StreetSaver® Decision Tree it is imperative that we are using current pricing. Ask me one day why The Barnhardt Group exists and I will tell you the story of when I was taking care of all of the Public Works Services for the largest privatized City in America, The City of Sandy Springs. They paid hundreds of thousands of dollars for pavement management from a high level consultant and got unit prices from 7 states away and two decades ago!

 

If you want to save millions following the Three Legged Stool™ System of pavement management that I outline in the Amazon Number One Best Seller The Book on Better Roads, then it is imperative that we are dealing with current and accurate unit pricing! Further we are utilizing ALL OF THE TOOLS IN THE TOOLBOX. Many consultants will leave you with a binder full of PCI ratings with three repairs, namely, thin overlay, medium overlay and thick overlay. SHAME ON YOU if you fall into that trap!!!!

 

Where I come from, the State DOT used to overlay their roads on a 7-year cycle, now one of their officials stated at a recent national meeting that due to budget constraints they could only overlay on a 99 year cycle. One day I will find that video clip and produce it as an IPMA™ Tip of the Week for your enjoyment!!!

 

  • Are there any dangerous areas of town we shouldn’t be in after dark?

 

We have to know the answer to this question just so we can stay alive to manage more pavements and make more videos.

 

OK this list is still in the works and I will edit it as I prepare the PDH Power Hour 2016 webinar series, but for know, I need to get out on the Prowler and survey some more roads for The City of Kingman, AZ. For those of you in AZ, recall that we have the cooperative bid clause set up with the City so you can bolt onto that contract at your earliest convenience!

 

Blair

 

Call me at 404-316-9792 anytime 7 days a week or blair@ipma.co we love serving our Circle Of Pavement Management RockSTARS!!!!

320x50a

Flash Sale | 15 Hours on Pavement Management Training

Blair is going to kill me!

The Unreleased Black Album was selling SO fast!!  I panicked and ordered the 8 DVD Special instead of the Single DVD (yeah, and a whopping 200 pcs).

As you can guess, this pushed “BOSS MAN” over the edge due to the HUGE inventory cost differential. 😦

This one is normally $400 BUCKS!

Just give me the cost back and he might keep me around.

CLICK HERE to have it delivered for $90.91!!! (I am paying your shipping in the US, for sure!)

THEY GOT TO GO!  I love my job!

(There is a bit of urgency here)

Here’s what’s inside:  Over 15 HOURS across 4 different states in countless INSIDER TIPS.  Since agency folks are not allowed to travel, we have produced amazing training sessions to view in the comfort of your office or home.

Guest speakers include the following:greatesthits-dvd-3d
Basem Muallem, PE
Brian Frix, EIT, APM
Dr. Mike Heitzman, PE
James Emerson, APM
Blair Barnhardt, APM
Kevin Donnelly, APM
Dr. Gary Hicks, PE
Miguel Valentin, PE, APM
Dave Fokken
Pat Faster
Rusty Smallwood
Mark Beatty

PS. The Greatest Box Set includes PDH Power Hour 01 as a special bonus.
As this deal is only good through my termination dat, take advantage now by ordering today!”

BUY ME

Howard Shieh, PE, APM emphatically states, “Blair’s training episodes and book really inspire me. His experience and enthusiasm with pavement management is remarkable!”

PLEASE BUY ME

I hope you take advantage of this great offer!

Best,

Lori
(404) 953-0131
320x50a

Georgia Pavement Management Software

SOME state DOTs are telling their local agencies to use a pavement management system that is dated or not capable of running budget scenarios on the most cost effective treatments or take full advantage of pavement preservation….

WORSE than that they are not themselves using the actual software they are trying to get you to use….

MOREOVER, a local agency like yours no matter how small has hundreds of millions of dollars of valuable roadway assets, but you don’t have enough money to maintain them

Want to do this right, then call us to set you up, or at least get the book and go through IPMA Academy….404-953-0131

320x50a

Ok, a quick disclaimer reminder here as you enjoy the book, we are not here to promote any one product, service or company.

We’ll talk about software like MicroPAVER™ and StreetSaver® pavement management software, on the consulting side of the business, we set up about 14 or 15 local agencies in the Southeast with StreetSaver® pavement management software. We also used MicroPAVER™ to do pavement manager for the US Corp of Engineers at Dugway Proving Ground in Utah. On the teaching side we cover both software in detail in IPMA™ Academy www.ipmaacademy.com and do private customized training on both. There may be many different ways to evaluate and manage your pavments, these two software programs we discuss may be the only two that follow ASTM 6433 verbatum. The reader is encouraged to look at all of the options, not just the ones that we discuss in this book.

That being said, know that many cities and counties across this country and the world use these two programs with great success.

CITY OF WINDER, GA

For those of you who are interested you can listen in to www.betterroadradio.com the only podcast on the planet dedicated to saving our crumbling roads, Episode 3 to hear a session from Blair and Scott as they discuss the key elements of setting up your pavement management system successfully.

At the end of the day even with all the people that have gotten involved in this loop for a mere 2 or 3 cents per square yard to implement a pavement management system and correlate all that back at their office and have this network level inventory of all the roads just like you said with the functional class codes what do we have for pavement types? What they heck are we going to do in 10 years, what are we going to do in 20 years?

Well the bottom line is in the case of Richmond which is a perfect example, if they can use the eco-efficient preservation in-place recycling techniques and save let’s say 20-30% of the budget so now they are saving $8.00 or $9.00 per square yard on any one given project, they are spending 3 cents that looks to me like a $7.97 net gain.

Now for those of you who don’t know how to collect that data or use your best guestimate or have your staff do the best guestimate you know we’ve had the IPMA™ Tip of the Week where we’ve had the fire hydrant where we taught you guys how to back calculate the base M&R date based on how many overlays we have, when was the subdivision originally built.

If you haven’t watched that episode, go to our YouTube Channel IPMATV and look up that www.youtube.com/user/ipmatv segment on the fire hydrant and back calculating the last M&R date. (as a reminder, if you register your Book on Better Roads at www.thebookonbetterroads.com/register you wont’ miss a single episode of IPMA™ TV).

 

 

 

 

 

 

 

 

 

IPMA™ Tip of the Week|Super Slurry in the Heartland

Hey Pavement Professional!!!!

This week we have an amazing video training for you Pavement Management RockSTARS!  Live from Bel Aire Kansas we finally feature our IPMA™ Charter Member Andale Paving as they show of their state of the art Super Slurry process that is taking over the Heartland stabilization industry!

If you are a local agency engineer that loves to do FDR Full Depth Reclamation on your crumbling roads but hate nasty Portland cement dust or other fugitive dusts flying around the country side this is for YOU!!!

Please sit back and enjoy part one here as I get into producing part two of this mini series!

Your IPMA™ Tip of the Week|Super Slurry in the Heartland!!!!
I am so glad to have the opportunity now to sit down in the Better Roads Bus each night and produce more valuable training content than anyone has ever seen in this lifetime!

ENJOY!

Contact Lori if you have any questions or pavement management projects you would like us to look at for you!

OH!  And here is the link for the “YouTubers”:

Blair

High-volume pavement preservation: Untapped potential for contractors

Re-Blogging from Better Roads Magazine

BY:  Chris Hill

|  February 15, 2016 |

Screen Shot 2016-02-15 at 7.17.10 PMAsphalt pavement preservation is a tactic used primarily in the realm of low-volume roadways. It has helped municipalities expand road life, keep overall highway maintenance costs down, and keep residents relatively happy during their commutes to and from work and home.

The success of these programs, along with interest from the Federal Highway Administration, is now pushing the paving industry to focus on pavement preservation for high-volume roadways.

The National Center for Asphalt Technology (NCAT) at Auburn University is leading the way, implementing pavement preservation test plots on U.S. 280 in central Alabama. The highway is a major artery into the metro Birmingham area. (See sidebar below, “High-volume preservation method testing.”)

NCAT directed placement of these plots last summer, collecting performance data such as roughness, rutting and cracking. In addition to collecting this data weekly, they are also studying more long-term performance metrics (such as field permeability) on a quarterly basis.

The test is designed to be a “rational starting point,” in order to narrow down which pavement preservation techniques are the optimal combination of life-cycle costs and performance. The secondary goal is to use the data gathered to create guide specifications, and to recommend guidelines for pavement quality assurance testing and inspection.

NCAT’s partner in road research, Minnesota Department of Transportation’s Minnesota Road Research Facility (MnROAD), is also testing some of the same pavement preservation treatments on high volume roadways in Minnesota’s cold-weather climate.

“Our goal is to execute a single experiment with nationwide impact through the MnROAD partnership,” says Buzz Powell, NCAT assistant director and test track manager. “This involves experiment design, construction planning, installation, performance testing, dissemination of findings, and (most importantly) implementation. It would be ideal for guidelines/specifications to be universal; however, best practices could vary as a function of climate, materials, etc.”

 

Municipal experience

Screen Shot 2016-02-15 at 7.17.00 PMThe Charleston County (South Carolina) Transportation Development department has been a model example of a municipality continually improving and expanding a preservation program. In honor of those achievements, For Pavement Preservation (FP2) awarded the agency its 2014 James B. Sorenson Award. FP2 lauded the agency for its work testing and implementing multiple preservation techniques, and for its communication efforts explaining the preservation work to the public.

Though more than 80 percent of the county’s preservation work takes place on low-volume roadways, according to Richard Turner, project and preservation program manager, one method stands out for its effectiveness on high-volume roadways: microsurfacing.

“We continue to run pilot projects trying different applications, and probably the most used is microsurfacing,” Turner says. “I’ve seen that successfully placed on high-volume roads here in Charleston, by us or by the South Carolina Department of Transportation (SCDOT), assuming it’s put on the right road at the right time. If you put a microsurfacing treatment down on a road that’s a little bit further into its life, the microsurfacing lifecyle won’t be as good as it would be if you applied the treatment earlier in its life.”

This technique is fairly new in the market for high-volume roads in South Carolina, with SCDOT using the technique for the first time seven years ago (on U.S. 17 in Charleston County). Turner says his agency’s first use of the technique was in 2011.

“We’re looking at a market that’s five to seven years old,” he says, adding that he hasn’t been able to work with contractors in South Carolina because there aren’t any doing the work. Instead, contractors from adjacent states are winning the contracts.

“The two or three companies that are bidding on projects throughout South Carolina are able to have a nomad crew that comes and spends 30 to 60 days in each county, get the work done and report back. I don’t know if there’s anyone in the state ready to invest yet or not.”

From Turner’s perspective, microsurfacing is a far better application for high-volume settings (compared to low-volume roads), a viewpoint that comes as a direct result of his agency’s communication efforts. It boils down to look and feel.

“When it’s placed on roads that are higher volume, we’ve gotten no complaints,” he says. “When we’ve placed it on lower volume roads, that’s when we get the questions. It’s mostly because you have folks walking on these roads and they’re looking at every little detail of that road. They can tell that it’s not the same as a hot mix or dense graded asphalt. That’s when they notice it. When you’re driving down the road you can’t see it or feel it. You can’t tell that it’s any different.”

Screen Shot 2016-02-15 at 7.17.22 PMPlacing a microsurface treatment on high-volume roads changes the esthetics of the mat, Turner explains, with more traffic improving its appearance within the first month of use. “The effectiveness of it doesn’t change one way or another, but from a public perception standpoint, I think it looks better on a high volume road,” he adds.

Public perception of microsurfacing has taken a hit from instances of improper placement, and also from the application being used as more of a temporary bandage. “Those roads needed much more than a microsurfacing or some other preservation treatment,” Turner says.

Turner’s point touches on a major concept of pavement preservation. A roadway in need of major work, or one that is failing, is not a good candidate for preservation work and requires more extensive rehabilitation. To paraphrase Marty Comer, the president of Comer Contracting in Connecticut, even in lieu of public opinion, preservation is a difficult concept for some municipalities to grasp.

“It’s a real tough sell,” he says. “Pavement preservation is for ‘good’ pavement, and to get people to spend money on good pavement is sometimes a challenge. In dealing with municipalities, it’s a tough sell when they have bad roads that need work and then they try and spend money on preservation work. That’s what the whole industry has been promoting for quite a number of years, but it’s still a tough sell.”

 

Contractor perspective

As in South Carolina, microsurfacing has emerged as the high-volume preservation of choice in Connecticut. And just like its southern counterpart, Connecticut faces a shortage of contractors to perform the task. Even as a pavement preservation specialist, most of Comer’s work is chip seal.

But, much of the preservation work in the state has been handled a different way. Connecticut has seen a strong run of resurfacing work over the past few years, with the state’s Department of Transportation recently reporting 2015 as the fourth straight year of increased two-lane road resurfacing.

“There was a lot of bituminous concrete (asphalt) put down last year as far as historical amounts, and they plan to do a fair amount this year,” Comer says. “ConnDOT has a tendency to call that pavement preservation, especially if it’s thin lift, because the paving industry has tried to make that the pavement preservation of choice.“

“The public will, to a certain extent, accept cape seal in this area with chip seal and microsurfacing over it,” he adds. “They still turn their nose up at it a little bit, but it’s perceived as more acceptable because it’s smoother. “

“The name of the game in any surfacing project is to avoid having loose stone. For instance, if you’re going to chip seal, it needs to be swept practically the same day. That’s where I think it’s going, at least where I’m working. The motoring public doesn’t accept chip seal well, but if you can make it smoother, if you can sweep it up real quick, then the pavement maintenance industry can have more success. You certainly have to be neat and produce a good looking product.”

 

– See more at: http://www.equipmentworld.com/high-volume-pavement-preservation-untapped-potential-for-contractors/#sthash.N4fGzf4Z.dpuf

Secret Sale Results | Pavement Management

Screen Shot 2016-02-11 at 7.16.36 PM

Congrats to the City of Kingman AZ, City of Jefferson, GA and City of Vidalia …  for taking advantage of our SECRET SALE!

We may never do that again but if you ever see a secret sale announcement be sure to get in!!!!

Do you want to learn more about the Three Legged Stool™ System of Pavement Management that everyone is talking about?

 “As a private consultant, Mr. Barnhardt is used to developing cost-effective roadway maintenance recommendations for various pavement owners at the network level.  Most pavement managers agree the next indispensable step is to go out and drive the roads to see conditions firsthand before making final decisions.  True to form, Mr. Barnhardt, having little regard for state boundaries or distances on the map, jumped into a 23’ RV and drove over 80,000 miles on US roads over a relatively short period of time, talking to folks to see how things are done across the land and to investigate where efficiencies might be improved.  I don’t know anyone else that knows pavements who has personally driven some 3% of the paved miles in the US.  I don’t know about you, but I’m interested to read and hear more of what he has to say.” Jonathon Heese, APM, Arapahoe County, CO  (TBG Pavement Management Client)

Today is YOUR DAY!

Schedule a FREE Consultation with Blair for YOUR Local Agency Below by contacting lori@thebarnhardtgroup.com

After all, local agencies are responsible for maintaining 78% of the roads in the US. So of the 4,000,000 miles of US roads, both paved and unpaved, local agencies are responsible for about 2,000,000 miles of paved roads and many more miles of gravel roads. And most of us don’t have enough resources to do the job. And we’re competing for scarce resources with a seemingly endless stream of competing priorities, most more glamorous and exciting than roads. And our roadway maintenance costs continue their upward spiral. The way I see it, we have a huge responsibility and maybe even a bigger challenge in front of us!

Please book a phone consultation or in person meeting and start saving millions TODAY for your local agency, firm, base, facility or HOA! We don’t have to have crumbling roads any longer, will you join us?

We have limited availability of meeting times due to high demand, so be sure to take advantage of our offer quickly!  To book your phone consultation or personal meeting with Blair, simply call Lori at 404-953-0131 or email lori@thebarnhardtgroup.com!  Let’s get started!!!!

P.S. Blair will be sure to load up the Better Roads Bus with a box full of copies of his Amazon #1 Best Seller ‘The Book on Better Roads’ so you can get a free copy when you meet with him!  (This isn’t rocket science folks – let’s do this thing)

 

Best,

Lori Miles

IPMA Tip of the Week | Pavement Management

Hey Pavement Management RockSTARS all across this planet, here is another amazing IPMA™ Tip of the Week for you to watch and share with your employees and colleagues!

In this session, Blair discusses how to handle all those old “pipe farm” subdivision that are now coming back to life like Elvis coming back from the dead (hope we didn’t offend anyone there!)

There are some key takeaways here so that you don’t have to lie awake at night worrying about how to explain to your council or commission about why the brand new overlay down there at that fancy pants subdivision is already tearing up!!!!

Blair has promised Team IPMA™that now that 2016 is going to be the year that he produces more content for you folks than any and all other forces combined can produce in a lifetime (OUCH) so stay tuned for hundreds of all these really cool videos, blogs, podcasts, you name it, with behind the scenes interviews with many of the industries most thought changing leaders in public works and private sector!
marketplace640b
There are many ways for you to get more involved with us as we grow as well.  It all starts with the Book on Better Roads which is FREE! And then if you like what you are seeing here today in this video, you can learn a whole bunch more about other products and services that we offer like Pavement Managers Club over at www.blairbarnhardt.com

See you soon!!!!